Siemens SCALANCE X-300 Configuration Manual page 188

Configuration using Web Based Management and Command Line Interface
4.5 The Switch menu
If a port is authenticated using the "MAC Authentication" method and the "VLAN Assignment
Allowed" option is disabled, no VLAN will be assigned to the port ("-"). In this case, you first
need to assign a VLAN.
If a port is authenticated using the "MAC Authentication" method and the "VLAN Assignment
Allowed" option is enabled, the port is defined as "A".
Syntax of the Command Line Interface
Table 4- 56
info
add <VLAN-ID> [<option>
[ports]]
188
Current VLAN Configuration - CLI\SWITCH\VLAN>
Command
Shows the currently configured VLANs and their
relationship to the ports.
Inserts a new VLAN.
The following abbreviations are available for the <op-
tion> parameter.
-
•
The port is not a member of the VLAN.
m
•
The port is a member of the VLAN, frames are
sent with a VLAN tag.
u
•
The port is a member of the VLAN, frames are
sent without a VLAN tag.
f
•
The port is not a member of the VLAN and it can-
not be configured as belonging to the VLAN dy-
namically by GVRP.
t
•
The port is automatically a member of all config-
ured VLANs and only sends tagged frames.
Examples:
add 2
•
Creates an entry with the VLAN-ID 2 and the de-
fault name "Vlan 2".
add 4 m
•
Creates an entry with the VLAN-ID 4 and the de-
fault name "Vlan4". All existing ports are mem-
bers.
Description
Configuration Manual, 10/2014, C79000-G8976-C187-22
Comment
Administrator
only.
SCALANCE X-300 / X-400