Siemens SCALANCE X-300 Configuration Manual page 100

Configuration using Web Based Management and Command Line Interface
4.4 The Agent menu
Creating a new group
After clicking the "New Entry" button in the "SNMPv3 Group Configuration" window, the
window for creating a new group opens:
Figure 4-31
Group Name
Enter the name of the group here. This name must have at least two characters, the
maximum length is 32 characters.
Security Level
Here, you select the security level that will apply to the group.
Read and Write
Here, you specify whether members of the group have read access, write access, or both.
Syntax of the Command Line Interface
Table 4- 23
info
add <groupname> [secu-
ritylevel]
100
SNMPv3 Group Configuration II
SNMPv3 Groups - CLI\AGENT\SNMP\GROUP>
Command
Displays a list of all SNMPv3 groups.
Adds a new SNMPv3 group. You specify the
security level with the following parameter
settings:
NOAUTH
•
No authentication, no encryption.
AUTH
•
Authentication with the MD5 or SHA al-
gorithm, no encryption.
PRIV
•
Authentication with the MD5 or SHA al-
gorithm, encryption with the DES3 algo-
rithm.
Description
Configuration Manual, 10/2014, C79000-G8976-C187-22
Comment
-
Administrator only.
SCALANCE X-300 / X-400