Siemens SCALANCE X-300 Configuration Manual page 172

Configuration using Web Based Management and Command Line Interface
4.5 The Switch menu
Syntax of the Command Line Interface
Table 4- 48
info
add <VLAN-ID> <MAC
address> [<option>
[ports]]
find [VLAN-ID] <MAC
address>
edit <VLAN-ID> <MAC
address> <option> [ports]
delete <VLAN-ID> <MAC
address>
172
Current Multicast Groups - CLI\SWITCH\MCAST>
Command
Shows the content of the address table of an IE switch.
Inserts a static entry for a multicast address in the ad-
dress table.
The following abbreviations are available for the <option>
parameter:
–
•
Not a member of the multicast group. No multicast
frames are sent via this port.
m
•
Multicast frames are sent via this port.
f
•
Not a member of the multicast group. Moreover, this
address may not be an address learned dynamically
with GMRP.
Examples:
add 2 01:02:03:04:05:06 m 5.1-5.2
•
Assigns the MAC address of the VLAN-ID 2 and ports
5.1 and 5.2 are members.
add 3 01:02:03:04:05:06 m
•
Creates an entry for VLAN-ID 3, all existing ports are
members.
Searches for a MAC address in the address table of an
IE switch. You can also see the ports to which a received
frame with this (destination) address is sent.
If you do not specify a VLAN-ID, all VLANs are browsed
for the specified MAC address.
Changes an entry in the address table. For the <option>
parameter, the same abbreviations area available as for
the add command.
Deletes a static entry from the address table.
Description
Configuration Manual, 10/2014, C79000-G8976-C187-22
Comment
-
Administrator
only.
-
Administrator
only.
Administrator
only.
SCALANCE X-300 / X-400