Access Control Port Configuration - Siemens SCALANCE X-300 Configuration Manual

Configuration using Web Based Management and Command Line Interface
4.5 The Switch menu
4.5.6.3

Access Control Port Configuration

Enabling the Access Control function
By selecting the relevant options, you specify whether or not Access Control is enabled for
each individual port. If the function is enabled for a port, packets from unknown MAC
addresses are discarded immediately. Only packets from known nodes (see Current Unicast
Filter (Access Control List) menu item) are accepted.
Figure 4-63 Access Control Port Configuration
Syntax of the Command Line Interface
Table 4- 46
actrl [<E|D> [ports]]
166
Access Control Port Configuration - CLI\SWITCH\UCAST>
Command
Enables/Disables the Access Control function for the specified
ports.
If you do not specify any ports, Access Control is ena-
bled/disabled for all ports.
Description
Configuration Manual, 10/2014, C79000-G8976-C187-22
Comment
Administrator
only.
SCALANCE X-300 / X-400