Siemens SCALANCE X-300 Configuration Manual page 60

Configuration using Web Based Management and Command Line Interface
4.2 The System menu
Latitude
Here, you enter the value of the northern or southern latitude of the location of the device.
For example, +49° 1´ 31.67" means that the device is located at 49 degrees, 1 minute and
31.67 seconds north.
A southern latitude is indicated by a preceding minus sign.
You can also append the letters N' (north) or S' (south) after the numbers (49° 1´ 31.67" N).
Longitude
Here, you enter the value of the eastern or western longitude of the location of the device.
For example, +8° 20´ 58.73" means that the device is located at 8 degrees, 20 minutes and
58.73 seconds east.
A western longitude is indicated by a preceding minus sign.
You can also append the letters O' or E' (east) or W' (west) after the numbers
(8° 20´ 58.73" E).
Height (geographic height)
Here, you enter the value of the geographic height above seal level in meters.
For example, 158 m means that the device is located at a height of 158 m above sea level.
Heights below sea level are indicated by a preceding minus sign.
Entering the geographic coordinates
The values for the geographic coordinates can be entered in the text boxes, for example
● as degrees with minutes and seconds in the formats:
DD°MM.MMM´, DD°MM´SS, DD°MM´SS.SSS
● in degrees in decimal format: DD.DDD°
● with or without a sign or with the letter S; N, E (or O) and W appended
Syntax of the Command Line Interface for the geographic coordinates
Table 4- 13
info
lat [string]
long [string]
height [string]
60
Geographic coordinates - CLI\SYSTEM\GEO>
Command
Displays the current status of the geographic coordi-
nates.
Shows/sets the geographical latitude coordinate.
Shows/sets the geographical longitude coordinate.
Shows/sets the geographical height coordinate.
Description
Configuration Manual, 10/2014, C79000-G8976-C187-22
Comment
-
Administrator only.
Administrator only.
Administrator only.
SCALANCE X-300 / X-400