Siemens SCALANCE X-300 Configuration Manual page 104

Configuration using Web Based Management and Command Line Interface
4.4 The Agent menu
Delete
Click on this button to delete a user.
Creating a new user
After clicking the "New Entry" button in the "SNMPv3 Users Configuration" window, the
window for creating a new user opens:
Figure 4-34
User Name
Enter the name of the new user here.
Group Name
Here, you select the group to which the new user will belong.
Syntax of the Command Line Interface
Table 4- 24
info
add <username>
<groupname>
auth <username><MD5|SHA>
pass
<username><authentpassword>
[encr.password]
104
SNMPv3 Users Configuration II
SNMPv3 Users - CLI\AGENT\SNMP\USER>
Command
Displays a list of all SNMPv3 users.
Adds a new SNMPv3 user to a group.
If authentication is necessary for the group,
MD5 is selected as the default algorithm.
Changes the authentication algorithm (MD5
or SHA) or an SNMPv3 user.
This command can only be used for mem-
bers of a group for which this authentication
is necessary.
Changes the passwords of an SNMPv3 user
(maximum length 32 characters).
This command can only be used for mem-
bers of a group for which this authentication
is necessary.
The encryption password can only be speci-
fied if it is necessary.
Description
Configuration Manual, 10/2014, C79000-G8976-C187-22
Comment
-
Administrator only.
Administrator only.
Administrator only.
SCALANCE X-300 / X-400