Siemens SCALANCE X-300 Configuration Manual page 225

Tx-only: This port can only send LLDP frames.
Tx and Rx: This port can receive and send LLDP frames.
Disabled: This port can neither receive nor send LLDP frames.
Syntax of the Command Line Interface
Table 4- 71
Command
info
lldpport <mode> [ports]
SCALANCE X-300 / X-400
Configuration Manual, 10/2014, C79000-G8976-C187-22
Configuration using Web Based Management and Command Line Interface
Current Multicast Groups - CLI\SWITCH\LLDP>
Description
Displays the current LLDP settings.
Changes the LLDP settings for a port. If no port is
specified, all ports are changed.
The <mode> parameter can have the following values:
rx
•
receive only
tx
•
send only
e
•
receive and send
d
•
neither receive nor send
4.5 The Switch menu
Comment
-
Administrator
only.
225