Siemens SCALANCE X-300 Configuration Manual page 281

Settings for the SCALANCE X-400
RIP
Enables the "Routing Information Protocol version 2" option (RIP).
Note
The router uses the RIP protocol as soon as at least one interface was configured for RIP.
OSPF
Enables the "Open Shortest Path First protocol version 2" option (OSPF).
Note
The router uses the OSPF protocol as soon as at least one interface for OSPF is configured
and a router ID has been specified.
Use Hardware
The SCALANCE X-414 provides the option of high-speed hardware routing. Select this
check box if you want to enable hardware routing for the default addresses.
Note
If the default route is entered in the hardware, this reduces the number of subnets that can
be reached using routing to 14.
With dynamically learned routes (RIP or OSPF), the routing mechanism automatically
removes the default routes from the hardware when necessary.
Syntax of the Command Line Interface
Table 4- 89
setrip <E|D>
setospf <E|D>
defrthw <E|D>
SCALANCE X-300 / X-400
Configuration Manual, 10/2014, C79000-G8976-C187-22
Configuration using Web Based Management and Command Line Interface
Router Configuration - CLI\ROUTER>
Command
Enables/Disables RIP
Enables/Disables OSPF
Enables/disables hardware routing for default addresses.
4.7 The Router menu (SCALANCE X414-3E)
Description Comment
Administrator only.
Administrator only.
Administrator only.
281