Agent Timeout Configuration - Siemens SCALANCE X-300 Configuration Manual

delete <username>
clearall
4.4.4

Agent Timeout Configuration

Setting the timeout
Here, you can set the times after which there is an automatic logout in WBM or CLI.
Figure 4-35 Agent Timeout Configuration
Web Based Management (sec)
Here, you specify the WBM timeout.
Permitted values for the WBM timeout: 60-3600 (seconds)
0 means: There is no automatic logout.
CLI (TELNET, SSH, Serial) (sec)
Here, you specify the CLI timeout.
Permitted values for the CLI timeout: 60-600 seconds
0 means: There is no automatic logout.
Syntax of the Command Line Interface
Table 4- 25
Command
info
wbmtime
clitime
SCALANCE X-300 / X-400
Configuration Manual, 10/2014, C79000-G8976-C187-22
Configuration using Web Based Management and Command Line Interface
Command
Deletes the SNMPv3 user with the specified
name.
Deletes all SNMPv3 users from the list.
CLI\AGENT\TIMEOUT>
Displays the current timeout settings.
Sets the WBM timeout (in seconds).
Sets the CLI timeout (in seconds).
Description
Description
4.4 The Agent menu
Comment
Administrator only.
Administrator only.
Comment
-
Administrator only.
Default value: 900
Administrator only.
Default value 300
105