Honda Civic 2002-2003 Service Manual page 197

Table of Contents

Advertisement

6.
After the coolant has drained, tighten the radiator
drain plug securely, and install the reserve tank
drain cap securely,
7. Fill the reserve tank to the MAX mark (AI with
Honda All Season Antifreeze/Coolant Type 2
IP/N OL999-90011.
A
8. Pour Honda All Season Antifreeze/Coolant Type 2
into the radiator up to the base of the filler neck.
NOTE:
• Always use Honda All Season Antifreeze/Coolant
Type 2 (P/N OL999-90011. Using a non-Honda
coolant can result in corrosion, causing the
cooling system to malfunction or fail.
Honda All Season Antifreeze/Coolant Type 2 is a
mixture of 50% antifreeze and 50% water. Pre-
mixing is not required.
Engine Coolant Refill Capacity [including the
reserve tank capacity of 0.53
~
10.56 US
qtl:
5.0
«
15.3 US
qt)
9. Install the radiator cap loosely.
10. Start the engine, and let it run until it warms up (the
radiator fan comes on at least twice).
11. Turn off the engine. Check the level in the radiator,
and add Honda All Season Antifreeze/Coolant Type
2 if needed.
12.
Putthe radiator cap on tightly, then run the engine
again and check for leaks.
13.
Install the splash shield Isee step
22
on page
5-121 .
10-7

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents