Honda Civic 2002-2003 Service Manual page 811

Heating and Air Conditioning
Blower Unit Removal and Installation (cont'd)
5. Remove the steering hanger beam bracket cover
from the right side of the glove box opening, then
remove the bolts and the glove box frame.
6. Remove the ECM (see page 11-4).
7. Remove the EPS control unit (see page 17-67).
8. Disconnect and remove the PGM-FI main relays
and bracket assembly, then remove the ECM
bracket.
9. Disconnect the connectors (A) from the blower
motor and the power transistor, then remove the
wire harness clips (8) and the connectors (C).
Remove the self-tapping screws and the bracket (D).
A
~
-----,
D
B
c
21-40
10. Disconnect the connector (A) from the recirculation
control motor, then remove the wire harness clip
(8). Remove the mounting bolts, the mounting nuts
and the blower unit (C).
A-..............
B~~:~~~
,
6x1.0mm ,
9.8 N·m 11.0 kgl·m,
7.2Ibl·ft)
4,
6x 1.0mm
9.8 N·m 11.0 kgl·m,
7.2Ibl·ft)
11. Install the unit in the reverse order of removal.
Make sure that there is no air leakage.
12. Reconnect the negative battery terminal.
13. Do the engine control module (ECM) idle learn
procedure (see page 11-139).
14. Enter the anti-theft code for the radio, then enter
the customer's radio station presets.