Honda Civic 2002-2003 Service Manual page 954

4. Reconnect the dashboard wire harness B 5P
connector (A), and disconnect the horn switch
positive 1 P connector (B).
A
5. Using a jumper wire, connectthe horn switch
positive 1 P connector (B) to ground.
If the horns sound, go to step 6.
B
If the horns do not sound, replace the cable reel.
6. Reconnect the horn switch positive 1 P conector (B).
~
t=!..I
7. Using a jumper wire, connent the steering wheel to
body ground.
8. Close the contacts between the horn plate and the
contact plate.
If the horns sound, replace the steering column.
If the horns do not sound, replace the horn and
contact plate.
22-123