Manual Transmission
Countershaft Reassembly (cont'd)
9. Install the needle bearing.
10. Install the 2nd gear (A) by aligning the synchro
cone fingers (8) with 2nd gear grooves (C).
n" .. __
-A
c
11. Support the countershaft (A) on the steel blocks,
then install the 3rd gear (8) using the special tool
and a press (C). Do not exceed the maximum
pressure.
13-36
14,700 N (1,500 kgt,
3,307
(bl)
max.
07746-0030100
12. Install the 4th gear (A) using the special tool and a
press
(8).
Do not exceed the maximum pressure.
r~·,~_B
14,700 N (1,500 kgt,
3,307 (bt)
max.
07746-0030100
13. Install the 5th gear (A) using the special tool and a
press
(8).
Do not exceed the maximum pressure.
14,700 N (1,500 kgt,
3,307 Ibf) max.
07746-0030100