Honda Civic 2002-2003 Service Manual page 622

•
•
•
NOTE:
• The parking brake cables must not be bent or
distorted. This will lead to stiff operation and
premature failure.
Refer to the Exploded View as needed during this
procedure.
1. Release the parking brake lever fully.
2. Remove the rear console (see page 20-57),
3. Loosen the parking brake cable adjusting nut IA).
A
.. '.::: ·:··:::::'.c :::: . . . . . . . • • . . . • ;;' /
/
'y
4. Remove the parking brake cable clip IA) from the
brake cable IB).
c
B
5. Disconnectthe parking brake cable from the lever
Ie).
6. Remove the parking brake cable mounting
hardware, then remove the cable.
7. Install the new cable in the reverse order of
removal, and note these items:
Be careful not to bend or distort the cable.
Make sure the parking brake cable clip is fully
seated on the cable housing.
Do the parking brake cable adjustment Isee page
19-7).
19-27