Auto-Stop Position Adjustment - Honda Civic 2002-2003 Service Manual

•
•
Auto-stop position adjustment
5. With the moonroof wrench, operate the glass IA) to the auto-stop position.
G
::~
it
[ - ::-
!I ::
-
"
~./
.r5+--c
I'"
!~
B
5xO.8mm
5 N·m 10.5 kgf·m, 4 Ibf·h)
6. With an open-end wrench, loosen the auto-stop switch mounting bolts IC).
7. Adjustthe auto-stop switch ID):
==
D
Move the switch plate IE) a little at a time, then secure it at the position where you hear a faint click when the
switch cam IF) pushes the switch lauto-stop).
Check that the switch plate contacts the switch bracket IG).
8. Check the operation of the glass by operating the moonroof switch: From the tilt-up position to the fully closed
position, from the fully open position to the auto-stop position, from the auto-stop position to the fully closed
position.
9. Check for water leaks. Let the water run fleely from a hose without a nozzle. Do not use a high-pressure spray .
20-47