Table of Contents
Advertisement
Engine Lubrication
Oil Pump Overhaul (cont'd)
4. Measure the inner diameter of the No.1 bearing for
the front balancer shaft hole and the rear balancer
shaft hole.
Bearing Inner Diameter:
Front:
Standard (New): 20.000-20.020 mm
(0.7874-0.7882 in.)
Service Limit:
20.03 mm (0.789 in.)
Rear:
Standard (New): 24.000-24.020 mm
(0.9449-0.9457 in.)
Service Limit:
24.03 mm (0.946 in.)
Front:
Rear:
8-12
5. Measure the diameters of the No.1 journals on the
front balancer shaft and rear balancer shaft.
NO.1 Journal Diameter:
Front:
Standard (New): 19.938-19.950 mm
(0.7850-0.7854 in.)
Service Limit:
19.92 mm (0.784 in.!
Rear:
Standard (New): 23.938-23.950 mm
(0.9424-0.9429 in.!
Service Limit:
23.92 mm (0.942 in.!
Front:
Rear:
Advertisement
Table of Contents
Troubleshooting
