Trim Removal/Installation-Door Area - Honda Civic 2002-2003 Service Manual

Interior Trim
Trim Removal/Installation - Door Area
NOTE:
• Put on gloves to protect your hands.
• When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
• Take care not to bend or scratch the trim and panels.
1. Remove the trim as shown. To remove the door sill trim and B-pillar upper trim, remove the rear side trim panel
as necessary (see page 20-51).
2. Install the trim in the reverse order of removal, and note these items:
• Replace any damaged clips.
• Apply liquid thread lock to the anchor bolts before reinstallation.
• Before installing the anchor bolts, make sure there are no twists or kinks in the belts.
Fastener Locations
A
[>:
Clip, 2 B
[> :
Clip, 3 C
[> :
Clip, 7
20-50
(Black) (White)
~
To body.
REAR SIDE TRIM PANEL
FRONT SEAT BELT
UPPER ANCHOR BOLT
7/16-20 UNF
32 N·m (3.3 kgf·m, 24 Ibf·ft)
0.;
DOOR OPENING TRIM
\
/~~~NTSIDE
UPPER ANCHOR
~j'-l':'
B
COVER
C.~
~.~
_.~.~Jt. :.-~j~~c~"
KICK PANEL
. , _
._~" vr~ ~SCREW
(2:. _
VVc
J,-'';'"
DOOR Sill TRIM
/ '0
0
__ - -
lOWER ANCHOR CAP
FRONT SEAT BELT lOWER
ANCHOR BOLT
7/16-20
UNF
32 N·m (3.3 kgf·m, 24 Ibf·ft)