Fuel Pulsation Damper Replacement - Honda Civic 2002-2003 Service Manual

Fuel Supply System
Fuel Pulsation Damper Replacement
1. Relieve the fuel pressure (see page 11-1441.
2. Remove the engine cover.
3. Remove the fuel rail mounting nuts from the fuel
rail.
4. Remove the ground cable (Gl01).
5. Raise the fuel rail.
6. Place a wrench (AI on the fuel rail (BI.
7. Place a wrench
(el
on the fuel pulsation damper (DI.
8. Remove the pulsation damper.
9. Install the fuel pulsation damper in the reverse
order of removal with new washers.
NOTE:
• Replace all washers whenever the fuel pulsation
damper is loosened or removed .
• If the drain hole (AI of the fuel pulsation damper
cover does not face bottom, reinstall it as shown.
A
11-154
•
•