Honda Civic 2002-2003 Service Manual page 187

•
•
•
Installation:
1. Install the intake manifold IA) with a new gasket (8),
then install and tighten the two stud bolts Ie).
~
..
' "
..
~~
..
/
\
22N·m
12.2 kgf·m, 16 Ibf·ftl
2. Tighten all intake manifold mounting bolts/nuts in a
crisscross pattern in two or three steps, beginning
with the inner bolt.
3. Tighten the bolt securing the intake manifold and
bracket.
8x1.25mm
22 N·m 12.2 kg/·m, 16Ib/.ft}
4. Install the pev hose IA}, harness holder mounting
bolt 18}, and harness clamp mounting bolt Ie}.
5. Install the fuel line Isee page 11·150).
6. Install the water bypass hoses.
\
,--------
7. Install the throttle cable Isee page 11·164), then
adjust the cable Isee page 11·163).
8. Install the cruise control cable Isee page 4·44), then
adjust the cable Isee page 4·45) .
Icont'd}
9-5