Testing And Repairs - Honda Civic 2002-2003 Service Manual

•
Testing and Repairs
• Do not use wires or harnesses with broken insulation.
Replace them or repair them by wrapping the break
with electrical tape.
• After installing parts, make sure that no wires are
pinched underthem.
• When using electrical test equipment, foliowthe
manufacturer's instructions and those described in
this manual.
If possible, insert the probe of the tester from the wire
side (except waterproof connector).
• Use back probe adaptor 07TAZ-001020A.
c
[
r--:'I
i.!=..I
Refer to the instructions in the Honda Terminal Kit for
identification and replacement of connector terminals .
icont'dl
22-5