Honda Civic 2002-2003 Service Manual page 570

Front Suspension
Knuckle/Hub/Wheel Bearing Replacement (cont'd)
Special Tools Required
• Hub dis/assembly tool 07GAF-SE00100
• Ball joint remover, 28 mm 07MAC-SL00200
• Attachment 62 x 68 mm 07746-0010500
• Driver 07749-0010000
• Support base 07965-SD90100
1. Raise the front of the vehicle, and support it with
safety stands in the proper location (see page 1-8).
2. Remove the wheel cap, wheel nuts, and front wheel.
--/
______ ---- --- I
108N·m
111.0 kgf·m,
80Ibl·ft)
3. Remove the brake hose bracket mounting bolt (A).
'v"
"VA
. . . . ,-~ . . " '--------
\\ 8 x 1.25 mm
':ci--'
J'! ' .
22 N.m
. . i
~
..
12.2 kgl·m,
; / ' 261bl·ftl
B
12 x 1.25 mm
108N·m
111.0 kgl·m,
801bl·ftl
4. Remove the caliper bracket mounting bolts (B), and
remove the caliper assembly (C) from the knuckle.
To prevent damage to the caliper assembly or
brake hose, use a short piece of wire to hang the
caliper assembly from the undercarriage. Do not
twist the brake hose with force.
18-12
5. Raise the stake (A), and remove the spindle nut (B).
6. Remove the brake disc retaining flat screws (A).
--------
B
A
6x 1.0mm
9.8N·m
11.0 kgl·m.
7.2Ibl·ftl
7. Screw two 8 x 1.25 mm bolts (8) into the disc to
push it away from the hub. Turn each bolt two turns
at a time to prevent cocking the disc excessively,
•
•