Abs Indicator Does Not Go Off - Honda Civic 2002-2003 Service Manual

•
•
•
8. Disconnect the gauge assembly connector A (22P).
9. Check for continuity between gauge assembly
connector A (22PI terminal No. 12 and body ground.
GAUGE ASSEMBLY CONNECTOR A 122PI
1 4 5 6 10
111213141516 17 22
ABS IBLU/REDI
Q
=
Wire side of female terminals
Is there continuity?
YES-Repair short to body ground in the wire
between the gauge assembly and the ABS control
unit .•
NO-Go to step 10.
10. Disconnect the gauge assembly connector B (22PI.
11. Check for continuity between gauge assembly
connector B (22PI terminal No. 12 and body ground.
GAUGE ASSEMBLY CONNECTOR B 122P)
1 2 3 4 5 6 8 9 10
111213 16 171819 2122
GND IBlK)
Q
Wire side of female terminals
Is there continuity?
YES-Check for loose terminals in the gauge
assembly connectors. If the connectors are OK,
replace the gauge assembly .•
NO-Repair open in the wire between the gauge
assembly and body ground (G501) .•
ABS indicator does not go off
~
~
1. Check the No.8 (20AI fuse in the under-hood fuse/
relay box, and reinstall the fuse if it is OK.
Is the fuse OK?
YES-Go to step 2.
NO-Replace the fuse, and recheck. If the fuse is
blown, check for a short to body ground in this fuse
circuit. If the circuit is OK, replace the ABS
modulator-control unit .•
2. Check the No. 11 (7.5AI fuse in the under-dash
fuse/relay box, and reinstall the fuse if it is OK.
Is the fuse OK?
YES-Go to step 3.
NO-Replace the fuse, and recheck. If the fuse is
blown, check for a short to body ground in this fuse
circuit. If the circuit is OK, replace the ABS
modulator-control unit..
3. Disconnect the ABS control unit 31P connector.
4. Measure the voltage between terminal No. 18 and
body ground.
ABS CONTROL UNIT 31P CONNECTOR
1 2 4
1112 1415
16 17
+
B-FSR IWHT IGRN)
=
Wire side of female terminals
Is there battery voltage?
YES-Go to step 5.
NO-Repair open in the wire between the No.8
(20A) fuse and the ABS control unit..
(cont'd)
19-53