Console, Front And Rear Removal/Installation - Honda Civic 2002-2003 Service Manual

•
•
Consoles
Console, Front and Rear Removal/Installation
NOTE: Take care not to scratch the front seat,
dashboard, and related parts.
1. Remove the rear console IAI.
-1 Slide the front seat forward fully on each side.
-2 Remove the screws (8) from the rear portion of
the rear console.
-3 Slide the front seat rearward fully on each side.
-4 Pull the front portion of the rear console up to
detach the clips IC) and hooks ID), then release
the rear console from the front console IE).
-5 Starting althe rear, pull the rear console up,
then remove it.
Fastener Locations
B
~:Screw,
2 C C>: Clip, 2
o
o
2tl ' . . . . .
~
. . . : . :
.
,
,
~'<
/
,.B
E
2. Remove the front console IA).
-1 Pullout the dashboard center lower cover (8)
to detach the clips IC).
-2 Disconnect the accessory power socket
connector (0).
-3 Remove the console box mat IE).
-4 Remove the bolts IF), screws IG), and clips IH).
-5 Gently pullout the front console to release the
hooks II) and pins IJ).
Fastener Locations
CC>:Clip,3
F~:Bolt,2 G~:Screw,
2 HC>:Clip,2
@p
0=>
CI-p~
6x1.0mm
9.8N·m
: ~
11.0 kgf·m, 7.2Ibf·1t1
3. Install the console in the reverse order of removal,
and note these items:
Replace any damaged clips.
Make sure the accessory power socket connector
is plugged in properly.
Push the clips into place securely .
20-57