,
5. Disconnect the 5P connector, and make these input tests.
Cavity
Wire
Test condition
I
Test: Desired result
1
RED
Connectthe No.2
Check for passenger's
5
RED/BLU
terminal to the No.
window motor operation: If
1 terminal, and the
should run (the passenger's
No.4 terminal to
window moves down).
the No.5 terminal,
There should be battery
and turn the
Voltage.
ignition switch ON
(II), and press the
down button on
the power window
master switch for
the passenger's
window.
6. If all the tests prove OK, the switch must be faulty. Replace it.
r--:'I
~
Possible cause
~
result is not obtained
• Faulty master's window switch
• An open in the wire
·
Faulty passenger's window
motor.
22-131