Yamaha RCX222 User Manual page 444

[ 9] Memor y errors
9.33 : Sys. generation destroyed
9.34 : Sys. generation mismatch
Chapter
9
9.35 : Program too big
9.36 : Task data destroyed
9.37 : Object program destroyed
9.38 : Sequence object memory full
9.39 : Sequence object destroyed
9.40 : Cannot found sequence object
9-28
Code : &H0921
Meaning/Cause : Part or all of the system generation data has been destroyed.
Action : Remake the system generation data correctly.
Code : &H0922
Meaning/Cause : Mistake made in specifying the robot type/axis number of
system generation data.
Action : Redo the system generation correctly.
Code : &H0923
Meaning/Cause : Source program size exceeded the permissible size.
Action : Compress the source program size.
Code : &H0924
Meaning/Cause : Part or all of the data used in a task has been destroyed.
Action : Reset the program.
Code : &H0925
Meaning/Cause : Part or all of an object program has been destroyed.
Action : Make the object program again.
Code : &H0926
Meaning/Cause : Sequence object program exceeded its memory capacity.
Action : Compress the source size of sequence program, so that the
object program size is reduced.
Code : &H0927
Meaning/Cause : Part or all of the sequence object program has been destroyed.
Action : Make the sequence object program again.
Code : &H0928
Meaning/Cause : No sequence object program.
Action : Make the sequence object program.