Table of Contents
Advertisement
12. "SYSTEM" mode
3.
Operating device in "SERVICE" mode
Specify the operating device to use.
n
NOTE
The settings made here are only valid until the controller power is turned off.
Save these settings if you want to use them again after power is turned off.
w
WARNING
SETTINGS MAY BE CHANGED BUT THE CUSTOMER MUST BEAR RESPONSIBILITY
Chapter
FOR THEM. THE CUSTOMER SHOULD KEEP SAFETY IN MIND WHEN MAKING
4
CHANGES.
RPB
RPB/DI
RPB/COM
ALL
[Procedure]
1) Select "3. Operating device" in "SYSTEM>OPTION>SERVICE" mode.
2) Press
■ Editing the "SERVICE" mode devices
SYSTEM>OPTION>SERVICE
RPB
3) Select the operating device with
4) Press
keys.
4-228
Only RPB operation is allowed.
Allows RPB and dedicated input.
Allows RPB and online commands.
Allows operation by all devices.
(EDIT).
1.Service level
2.Movement Vel
3.Operating device
RPB/DI
RPB/COM ALL
to quit the setting. To continue selecting other items, use the cursor ( ↑ / ↓ )
Description
V9.00
LEVEL 3
<3%
RPB
(RPB) to
(ALL).
Advertisement
Chapters
Table of Contents
