Switching The Program - Yamaha RCX222 User Manual

9. "AUTO" mode
9.5

Switching the program

If the program displayed on the screen is not the one you want to execute, it can be
switched to another program.
n
NOTE
The output is also reset when the program is reset. However, the output will
not be reset when a sequence program is being executed without selecting
"RST.DO" in the sequencer execution "ENABLE/DISABLE" fl ag setting.
Chapter
4
[Procedure]
1) Press
Program information appears. A pointer is displayed on the line number of the
program which is currently selected.
2) Use the cursor ( ↑ / ↓ ) keys to select the desired program and press
The selected program will automatically be compiled and an object program file
made.
■ Switching programs
AUTO
4-36
(DIR) in "AUTO" mode.
>DIR
No. NAME LINE
1 TEST1 13
2 TEST2 50
3 PARTS100 38
4 TEST3
[T1] 100% <TEST2
BYTE RW/RO
125 RW
608 RW
411 RW
7 78 RW
.
>