12. "SYSTEM" mode
12.5.4
Use the following procedure to check the total controller operation time.
[Procedure]
1) Press
■ Displaying the total operation time
SYSTEM>DIAGNOS>TOTAL
Chapter
4
Total operation time (06/07/01, 12:05)
The 3rd line shows the date and time that the total operation time was reset.
The "Power-on time" is the total time that the controller power has been on.
The "Run time" is the total time that the controller has performed automatic operation.
Pressing
total operation time starting from the date and time after reset.
2) Press
4-248
Displaying the total operation time
(TOTAL).
Power-on time
=
Run time
=
(CLEAR) resets the total operation time. The display shows the new
to return to "SYSTEM>DIAGNOS" mode.
V9.00
YEAR DAY HOUR MIN
0/ 14/ 10: 34
0/
2/
8: 45
CLEAR