Device Range That Can Be Set - Mitsubishi Electric GOT1000 Series Connection Manual

10.4 Device Range that Can Be Set

The device ranges of controller that can be used for GOT
are as follows.
Note that the device ranges in the following tables are the
maximum values that can be set in GT Designer3.
The device specifications of controllers may differ
depending on the models, even though belonging to the
same series.
Please make the setting according to the specifications of
the controller actually used.
When a non-existent device or a device number outside
the range is set, other objects with correct device settings
may not be monitored.

Setting item
Item
Set the device name, file number, element number, and bit
number.
The bit number can be set only when specifying the bit of word
device.
Importing the tag file created by RSLogix5000,
Device
and confirming the tag name is available during
device setting.
For importing tag files, refer to the following
manual.
Informa Displays the device type and setting range which are selected
tion in [Device].
Set the station number of the PLC connected to the specified
device.
Host Select this item when monitoring the host PLC.
Network Select this when monitoring the other PLCs.
After selecting, set the station number of the
Other PLC to be monitored.
NWNo.: Set the network No.
Station No.: Set the station No.
10 - 18
10. CONNECTION TO ALLEN-BRADLEY PLC
10.4 Device Range that Can Be Set
Description
GT Designer3 Version1 Screen Design
Manual (Fundamentals)
POINT POINT POINT
Device settings of ALLEN-BRADLEY PLC
The ALLEN-BRADLEY
consists of a file and element.
Make setting as follows using GT Designer3.
(1) AB SLC500, AB Micro Logix
(a) When setting a bit address as a bit device
File type
File No.
Element delimiter
Setting by GT Designer3
File type File No.
File type
File No.
Element delimiter
Setting by GT Designer3
File type File No.
File type
Module No.
Element delimiter
Setting by GT Designer3
File type Module No.
File type
Module No.
Element delimiter
Setting by GT Designer3
File type Module No.
PLC device addressing
Bit No.
Bit delimiter
Element No.
↓
Element No. Bit No.
Bit No.
Bit delimiter
Element No.
↓
Element No. Bit No.
Bit position
Bit delimiter
Element No.
↓
Element No. Bit position
Bit position
Bit delimiter
Element No.
↓
Element No. Bit position