Plc Side Setting (Micrex-Sx Sph) - Mitsubishi Electric GOT1000 Series Connection Manual

4.3.3 PLC side setting
(MICREX-SX SPH)
POINT POINT POINT
FUJI PLC
For details of FUJI PLCs, refer to the following
manuals.
FUJI PLC user's Manual

Setting the IP address and self port reference
No.
Set the IP address and self port reference No. using a
peripheral tool of the PLC.
Item Set value
*1
[ ].[ ].[ ].[ ]
IP Address
Subnet Mask [ ].[ ].[ ].[ ]
Default Gateway IP
[ ].[ ].[ ].[ ]
Address
Self port reference
0 to 65280
*2
No.
*1 Adjust the settings with GOT settings.
■ Ethernet setting
*2 Make sure that "Self port reference No. + 251" is equivalent
to the port No. in the GOT.
■ Ethernet setting
4 - 28
4. CONNECTION TO FUJI PLC
4.3 Ethernet Connection
Range
PLC side IP address
PLC side setting