Mitsubishi Electric GOT1000 Series Connection Manual page 55


When using the printer unit, sound output unit, or external I/O unit
The printer unit, sound output unit, or external I/O unit can be installed in any position (1st to 3rd stage) of the
extension interface.
Example: When installing a printer unit

When using the video input unit, RGB input unit, video/RGB input unit, RGB output unit, or
multimedia unit
Install the video input unit, RGB input unit, video/RGB input unit, RGB output unit, or multimedia unit at the 1st stage
of the extension interface.These units cannot be used if installed in the 2nd or higher stage.
When any of these units is used, the communication units indicated below must be installed in the 2nd stage of the
extension interface.
Communication unit
Bus connection unit
MELSECNET/H communication unit
CC-Link IE controller network
communication unit
CC-Link communication unit
Example: When installing a video input unit and a MELSECNET/H communication unit
Communication
unit
Printer unit
GT15-QBUS2,
GT15-J71LP23-25,
GT15-J71GP23-SX
GT15-J61BT13
MELSECNET/H
communication unit
Video/RGB
input unit
1. PREPARATORY PROCEDURES FOR MONITORING
1.3 Option Devices for the Respective Connection
Model
GT15-ABUS2
GT15-J71BR13
Printer unit
Communication
unit
Video/RGB
input unit
MELSECNET/H
communication unit
1 - 25
1
2
3
4
5
6
7
8