Mitsubishi Electric GOT1000 Series Connection Manual page 170

(2) YASKAWA MP
Item Description
Set this item when change the transmission
Transmission speed used for communication with the
Speed connected equipment.
(Default: 19200bps)
Set this item when change the data length
used for communication with the connected
Data Bit
equipment.
(Default: 8bit)
Specify the stop bit length for
Stop Bit communications.
(Default: 1bit)
Specify whether or not to perform a parity
check, and how it is performed during
Parity
communication.
(Default: Even)
Specify the time period from the GOT
startup until GOT starts the communication
Startup Time
with the PLC CPU.
(Default: 3sec)
Specify the host address (station No. of the
PLC to which the GOT is connected) in the
Host Address
network of the GOT.
(Default: 1)
Set this item to adjust the transmission
timing of the communication request from
Delay Time
the GOT.
(Default: 0ms)
Select the steps to store two words (32-bit
32 bit Storage data).
(Default: Auto)
6 - 16
6. CONNECTION TO YASKAWA PLC
6.2 Serial Connection
Range
4800bps,
9600bps,
19200bps,
38400bps,
57600bps
8bit (fixed)
1bit (fixed)
Even (fixed)
3 to 30sec
1 to 31
0 to 30
( 10ms)
LH Order/ HL
Order/ Auto