Mitsubishi Electric GOT1000 Series Connection Manual page 146

POINT POINT POINT
(1) Host address
Do not specify a number between 200 and 215.
(2) Format
• When connecting to PXH, specify the format 1.
• When connecting to only PXR/PXG, specifying
the format 2 is recommended.
(3) Delay Time
Set the delay time to 5ms or more.
(4) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication Settings]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following
manual.
GT User's Manual
(5) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
5 - 12
5. CONNECTION TO FUJI TEMPERATURE CONTROLLER
5.4 GOT Side Settings