Mitsubishi Electric GOT1000 Series Connection Manual page 126


Station number setting
Set each station number so that no station number
overlaps.
The station number can be set without regard to the
cable connection order. There is no problem even if
station numbers are not consecutive.
Station Station
No.3 No.0
GOT
Examples of station number setting
(a) Direct specification
Specify the station No. of the PLC to be changed
when setting device.
Specification range
0 to 99
4 - 24
4. CONNECTION TO FUJI PLC
4.2 Serial Connection
Station Station Station
No.1 No.15 No.6