Mitsubishi Electric GOT1000 Series Connection Manual page 313

(4) AB SLC500
Item Description
Set this item when change the
transmission speed used for
Transmission
communication with the connected
Speed
equipment.
(Default: 19200bps)
Specify the adapter address (station
No. of the PLC that the GOT will
*1
Adapter Address
monitor) in the connected network.
(Default: 0)
Specify the host address (station No.
of the adapter to which the GOT is
*1
Host Address
connected) in the connected network.
(Default: 1)
*1 Do not specify the same value for the adapter address and
host address.
POINT POINT POINT
(1) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following
manual.
(2) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
Range
4800bps,
9600bps,
19200bps
0 to 31
1 to 31
10. CONNECTION TO ALLEN-BRADLEY PLC
GT User's Manual
10.2 Serial Connection
9
10
11
12
13
14
15
16
10 - 11