Mitsubishi Electric GOT1000 Series Connection Manual page 71


Perform an I/O check
Whether the PLC can communicate with the GOT or not can be checked by the I/O check function.
If this check ends successfully, it means correct communication interface settings and proper cable connection.
Display the I/O check screen by Main Menu.
• For GT16, GT12
Display the I/O check screen by [Main menu]
• For GT15, GT14, GT11
Display the I/O check screen by [Main menu]
For details on the I/O check, refer to the following manual.
GT
1.
User's Manual
1. PREPARATORY PROCEDURES FOR MONITORING
[Self check] [I/O check].
[Debug & self check] [Self check]
1.
Touch [CPU] on the I/O check screen.
Touching [CPU] executes the communication
check with the connected PLC.
2.
When the communication screen ends
successfully, the screen on the left is displayed.
1.6 Checking for Normal Monitoring
1
2
[I/O check].
3
4
5
6
7
8
1 - 41