Temperature Controller Side Setting; Connecting To Green Series - Mitsubishi Electric GOT1000 Series Connection Manual

8.5 Temperature Controller Side Setting

POINT POINT POINT
(1) YOKOGAWA temperature controller
For details of YOKOGAWA temperature controller,
refer to the following manual.
User's Manual of the YOKOGAWA temperature
controller
(2) RS232C/RS485 converter
For details on communication settings of the
RS232C/RS485 converter, refer to the following
manual.
User's Manual of RS232C/RS485 converter
Model name
GREEN
UT100
Temperature controller
UT2000
UTAdvanced
RS232C/RS485 converter ML2-
Refer to
8.5.1
8.5.2
8.5.3
8.5.4
8.5.5
8. CONNECTION TO YOKOGAWA TEMPERATURE CONTROLLER
8.5.1

Connecting to GREEN Series


Communication settings
Make the communication settings by operating the key
of the temperature controller.
(1) For the UT /UP /UM /US1000 (except UT750,
UP750)
Item
Transmission speed 9600bps (fixed)
*1
7bits, 8bits
Data bit
*1
Even, odd, none
Parity bit
*1
1bit, 2bits
Stop bit
*1*2
1 to 99
Address
0: PC link communication (without sum check)
*1
Protocol selection
1: PC link communication (with sum check)
*1 Adjust the settings with GOT settings.
*2 Avoid duplication of the address with any of the other units.
(2) For the UT750, UP750
Item
RS-485
communication
*1
Transmission speed
High performance
RS-485
communication
*1
7bits, 8bits
Data bit
*1
Even, odd, none
Parity bit
*1
1bit, 2bits
Stop bit
*1*2
1 to 99
Address
RS-485
communication
*1
Protocol selection
High performance
RS-485
communication
*1 Adjust the settings with GOT settings.
*2 Avoid duplication of the address with any of the other units.
8.5 Temperature Controller Side Setting
Set value
Set value
9600bps (fixed)
9600bps, 19200bps,
38400bps
0: PC link communication
(without sum check)
1: PC link communication
(with sum check)
0: PC link communication
(without sum check)
1: PC link communication
(with sum check)
8 - 33
1
2
3
4
5
6
7
8