Mitsubishi Electric GOT1000 Series Connection Manual page 202

4.
Select "Reboot (Online Mode)" on the "Reboot"
screen of the FCX Maintenance Page to set the online
mode.

Defining Logic POU
Define Logic POU using Logic Designer (peripheral
software), and download the project to STARDOM.
1.
Start Logic Designer and create a new project using a
template.
Use [STARDOM Serial Communication] template.
2.
Insert FA-M3 Emulator Firmware Library to the new
project.
(1) Right-click [Library] under the project tree in Logic
Designer.
(2) Right-click [Insert] and select [Firmware Library].
(3) Double-click the [SD_FCXPLCR_LIB] folder and
double-click [SD_FCXPLCR_LIB.fwl] to select it.
(4) The library path inserted in the procedures above
is as follows.
{Install Folder}\LogicDesigner\Mwt\Plc\Fw_lib\
SD_FCXPLCR_LIB\SD_FCXPLCR_LIB.fwl
3.
Insert FA-M3 Emulator User Library to the new
project.
(1) Right-click [Library] under the project tree in Logic
Designer.
(2) Right-click [Insert] and select [User Library].
(3) Double-click [SD_CFAM3R_PF.mwt] to select it.
(4) The library path inserted in the procedures above
is as follows.
{Install Folder}\LogicDesigner\Libraries\
SD_CFAM3R_PF.mwt
7 - 14
7. CONNECTION TO YOKOGAWA PLC
7.2 Serial Connection
4.
Copy a sample project POU to the new project.
(1) Open C{Install Folder}\LogicDesigner\Projects\
EXAMPLE_J.mwt.
(2) Right-click [FAM3_Emulator] in the Logic POU
under the project tree in the Example_J project,
and select [Copy].
(3) Right-click the [Logic POU] under the project tree
in the created new project, and select [Paste].
(4) Double-click the [FAM3_Emulator*] file in the
[FAM3_Emulator*] folder.
(5) For the following terminals, set as shown below.
REQ terminal
TERMCHAR terminal : FALSE
PORT terminal
STATION terminal
SD_CFAM3R_OPEN_COM1
SD_CFAM3R_OPEN
(*VALID*) TRUE REQ
(*COM1*) COM1
PORT
FALSE TERMCHAR
FALSE
CHECKSUM
STATION
STATION1
I I
D D
B B
COMERR1 COMERR
(Definition example of Logic POU)
5.
Defining the instance
Instantiate Logic POU. Define an already defined
instance to Task0.
(1) Right-click the [Physical hardware]
[Configuration:IPC_33/FCX01:FCX/Tasks/
Task0:CYCLIC] and select [Insert] - [Program
instance].
(2) Define the program instance name and select
FAM3_Emulator for the program type.
: TRUE
: COM1
: STATION1
VALID VALID1
ERROR1
ERROR
STATUS1
STATUS
I I
D
D
B B
COMERR COMERR1