Mitsubishi Electric GOT1000 Series Connection Manual page 53


When using a MELSECNET/H communication unit, CC-Link IE controller network
communication unit, or CC-Link communication unit (GT15-J61BT13)
Install a MELSECNET/H communication unit, CC-Link IE controller network communication unit, or CC-Link
communication unit in the 1st stage of an extension interface.
These communication units cannot be used if installed in the 2nd or higher stage.
Example: When installing a MELSECNET/H communication unit and a serial communication unit
POINT POINT POINT
Precautions for using a MELSECNET/H communication unit, CC-Link IE controller network communication unit,
CC-Link communication unit (GT15-J61BT13)
The installed stage number of communication units installed on the next stage of MELSECNET/H communication
unit, CC-Link IE controller network communication unit, or CC-Link communication unit are recognized by the GOT
differently depending on the extension interface position.
For communication units installed in the extension interface 2 side, even if the communication unit is physically
installed in the 2nd stage position, the GOT recognizes the position as the 1st stage.
Recognized as the 3rd stage
of extension interface 1
Recognized as the 2nd stage
of extension interface 1
Recognized as the 1st stage
of extension interface 1
Serial communication unit
MELSECNET/H
communication unit
1. PREPARATORY PROCEDURES FOR MONITORING
1.3 Option Devices for the Respective Connection
MELSECNET/H
communication unit
Serial communication unit
Recognized as the 2nd stage
of extension interface 2
Recognized as the 1st stage
of extension interface 2
MELSECNET/H communication unit
Relay connector
1
2
3
4
5
6
7
8
1 - 23