Mitsubishi Electric GOT1000 Series Connection Manual page 58


RS-422 interface
Use the following as the RS-422 interface and RS-422/485 communication unit connector on the GOT.
For the GOT side of the connection cable, use a connector and connector cover applicable to the GOT connector.
(1) Connector model
GOT
RS-422 conversion unit
*1
GT16
GT14
GT12
GT115 -Q
GT105 -Q
GT104 -Q
GT1030, GT1020
GT15-RS4-9S
GT01-RS4-M
*1 When connecting to the RS-422/485 interface, use HDR-E14MAG1+ as a cable connector.
To use HDR-E14MAG1+, a dedicated pressure welding tool is required.
For details on the connector and pressure welding tool, contact Honda Tsushin Kogyo Co., Ltd.
*2 The terminal block (MC1.5/9-ST-3.5 or corresponding product) of the cable side is packed together with the GT1030, GT1020.
(2) Connector pin arrangement
GOT main part connector
see from the front
1
14-pin (female)
1 - 28
1. PREPARATORY PROCEDURES FOR MONITORING
1.4 Connection Cables for the Respective Connection
Connector type
9-pin D-sub (female)
M2.6 millimeter screw
fixed type
14-pin (female)
9-pin D-sub (female)
M2.6 millimeter screw
fixed type
*2
9-pin terminal block
9-pin D-sub (female)
M2.6 millimeter screw
fixed type
GT16
8 14
7
Connector model
17LE-13090-27(D2AC)
HDR-EC14LFDT1-SLE+
17LE-13090-27(D3AC)
MC1.5/9-G-3.5BK
17LE-13090-27(D3AC)
GT15, GT14, GT12, GT11, GT105 ,
GT104 , GT01-RS4-M
GOT main part connector
see from the front
5 1
9 6
9-pin D-sub (female)
Manufacturer
DDK Ltd.
Honda Tsushin Kogyo Co., Ltd.
DDK Ltd.
PHOENIX CONTACT Inc.
DDK Ltd.
GT1030, GT1020
See from the back of a
GOT main part
9-pin terminal block