Copying The Copp Best Practice Policy - Cisco Nexus 9000 Series Configuration Manual

Nx-os security configuration guide, release 9.x
Hide thumbs Also See for Nexus 9000 Series:
Table of Contents

Advertisement

Copying the CoPP Best Practice Policy

DETAILED STEPS
Command or Action
Step 1
[no] copp profile [strict | moderate | lenient | dense]
Example:
switch(config)# copp profile moderate
Step 2
(Optional) show copp status
Example:
switch(config)# show copp status
Step 3
(Optional) show running-config copp
Example:
switch(config)# show running-config copp
Related Topics
Copying the CoPP Best Practice Policy
The CoPP best practice policy is read-only. If you want to modify its configuration, you must copy it.
SUMMARY STEPS
1. copp copy profile {strict | moderate | lenient | dense} {prefix | suffix} string
2. (Optional) show copp status
3. (Optional) show running-config copp
DETAILED STEPS
Command or Action
Step 1
copp copy profile {strict | moderate | lenient | dense}
{prefix | suffix} string
Example:
switch# copp copy profile strict prefix abc
Step 2
(Optional) show copp status
Example:
switch# show copp status
Step 3
(Optional) show running-config copp
Example:
switch# show running-config copp
Cisco Nexus 9000 Series NX-OS Security Configuration Guide, Release 9.x
480
Changing or Reapplying the Default CoPP Policy Using the Setup
Purpose
Applies the CoPP best practice policy.
You cannot disable CoPP. If you enter the no form of this
command, packets are rate limited at 50 packets per seconds.
Displays the CoPP status, including the last configuration
operation and its status. This command also enables you to
verify that the CoPP best practice policy is attached to the
control plane.
Displays the CoPP configuration in the running
configuration.
Utility, on page 490
Purpose
Creates a copy of the CoPP best practice policy.
CoPP renames all class maps and policy maps with the
specified prefix or suffix.
Displays the CoPP status, including the last configuration
operation and its status. This command also enables you to
verify that the copied policy is not attached to the control
plane.
Displays the CoPP configuration in the running
configuration, including the copied policy configuration.
Configuring Control Plane Policing

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents