Ricoh B064 SERIES Service Manual page 1140

Hide thumbs Also See for B064 SERIES:

Table of Contents

6.4 STAPLER UNIT MOVEMENT

Side-to-Side

The stapler motor [A] moves the stapler [B] from side to side. After the start key is

pressed, the stapler moves from its home position to the stapling position.

If two-staple-position mode is selected, for the first stack the stapler moves to the

rear stapling position first, staples, moves to the front position, staples and waits at

the front. For the second stack, the stapler staples the front corner first, then moves

to the rear corner and staples.

NOTE: For continuous stapling jobs, the corners are stapled rear then front for the

odd number stacks and stapled front then rear for even number stacks.

After the job is completed, the stapler returns to its home position. This is detected

by the stapler HP sensor [C].

CÓPIA NÃO CONTROLADA

B706D513.WMF

Chapters

Table of Contents

B246 series B140 series D052 series