A To Handle Thread At The Start Of Sewing - Mitsubishi Electric LY2-3300-B0B Instruction Manual

HOW TO USE
A To handle thread at the start of
sewing
1 . In the case of open sewing:
When the needle thread is not held by the
presser foot during sewing, the end of the
needle thread is stitched onto the reverse side
of the cloth, thus enhancing a sewing finish.
Slowly start to take up a few stitches at the
beginning so as to prevent the needle thread
from being off out of the needle.
2 . When the needle thread is held by the
presser foot:
The end of the needle thread remains on the
surface of the cloth.
To stitch in this way, it is preferable to pull
out the sewn fabric to the other side of the
presser foot at the end of sewing.
— 7 —
Needle thread
Bobbin thread
Needle thread
Cloth
Needle thread
Cloth