Modifying Stitch Length (All After Designated Stitch) - Mitsubishi Electric PLK-J Series Technical Manual

20. Modifying stitch length (All After designated stitch)

[Example] The stitch length from stitching data point A to the end of stitching is modified
as shown below. (3.0mm → 9.0mm)
Operation details
(1) Selecting the stitch length modification
►Enter the modification mode. (Refer to Page [11]-2)
►Press Stitch Data Change
modification
►Press
(2) Determining the modification method and the modification start position
►Set the method.
: Designated distance modification
: All After designated stitch
(In this case, press
►Determine the position to be modified with Jog
Set to the position to start modification (point A).
►Press
.
(3) Setting the stitch length and confirming execution
►Set the stitch length. (This will be "9.0mm" here.)
►Press
.
and Stitch length
.
to open the next screen.
)
.
[11]‐４１
→