ETC Expression 2.0 User Manual page 250

8 - 50 Expression 2.0
Page
Page has two functions: one is to select submaster pages; the other is
to display the Submaster and Group Sheets.
Submaster pages
Expression has two pages of submasters . Each page stores a complete
set of recorded submasters . This doubles the number of available
recorded submasters.
Expression displays the message Page 1 Loaded (or Page 2 Loaded) in
the message display window to indicate which page is currently active .
To switch pages, press [Page], enter the new page number, and press
[Enter] . The message indicates the new page number and displays the
message Loading instead of Loaded .
When you load a new page, any submasters set at a level above zero
remain on stage until you pull them down to zero . This prevents the
stage from going black when you switch pages . Submasters remaining
from the previous page are indicated by flashing bump switch LEDs .
Submasters on the new page are not loaded into pots until you pull them
down to zero . The message Loading remains flashing on the screen
until all submasters on the new page are loaded .
Warning: Changing pages momentarily interrupts any fades in progress.
[Page] also allows you to create a submaster while one page is loaded,
and to record it on the other page of submasters . To do so, follow these
steps:
1. Create submaster look.
2. Press [Rec].
3. Press [Page], and enter the page number on which you want to
record the submaster.