Back Key - ETC Expression 2.0 User Manual

4 - 34 Expression 2.0

Back key

The back key replays the most recently played cue, regardless of the
order in which the cues were recorded in the cue sheet. It then plays
subsequent cues in reverse numerical order. For example, if you play
cues one, two, three, twenty-two, and sixteen, then press [Back], cue
sixteen will fade into cue twenty-two. If you press [Back] again, cue
twenty-one will play, not cue three.
Cues are played back using the fade and wait times recorded with the
cue.
Back allows you to play back cues loaded in either fader pair. If you are
using only one fader pair, you need only press [Back] to replay the
previous cue. If you have cues loaded into both fader pairs, you must
press [Back] then the [Go] button below the desired fader pair. If you
play cues one, two and three in the AB fader pair and cues six, seven
and eight in the CD fader pair, pressing [Back] then the AB [Go] plays
back cue two; pressing [Back] then the CD [Go] plays back cue seven.
Note: Each time you press [Back], Expression resets the cue sheet. The
cue replayed with Back becomes the first cue in the cue sheet. If you
then press [Go] without first pressing [Back], the next numerical cue
plays.