ETC Expression 2.0 User Manual page 281

B - 4 Expression 2.0
You can disable this message by setting DIP switch B6 in the down
position .
For more information about DIP switch settings, see Appendix A, DIP
switch settings .
Optional feature not installed on this system
The option you selected is not installed on this console . Contact your
authorized dealer for information about installing options.
Printer is not ready
Your printer is not accepting data . Verify that printer is properly installed
and is turned on . Reselect the proper system setting, parallel or serial,
for your printer . For printer installation instructions, see Chapter 2,
Installation .
Record is locked out
Record switch is set at Lock . When record switch is in the Lock posi-
tion, you cannot add, change or delete show information in or from
memory . To enable record functions, insert the key provided with
console, and turn Record switch to the On position.
Selected show not recorded
The show number you selected is not recorded on the disk in drive.
Verify failed
Show recorded on disk is different from the show in console's memory .
If you just recorded show to disk, rerecord it . If you get the same error
message after the second recording, record show on a new disk.
Write-protected
Console cannot record to disks that are write protected . Insert another
disk or close write-protection window on current disk, and retry
operation.