Chapter 4 Learning the basics
provide additional information about channels . For example, in Blind
mode tracked channels are green . See the section Channel modes on
page 4 - 6 for further description.
Note: In Flexichannel display mode, only selected channels and channels
that are part of a recorded cue, submaster, group, or effect are dis-
played; other channels do not appear on the display screen. Channels
are displayed in vertical columns rather than in horizontal rows. The
Flexichannel display is a feature of Expression's expanded memory
option. See Chapter 8, Reference, Flexichannel for more information.
Cue/submaster description line
The cue/submaster description line displays information about the
currently selected cue, group or submaster . The summary includes cue,
group or submaster number, up and down fade times, wait and delay
times, fade or submaster type, and link information, if applicable.
Fader windows
Fader windows display fade time information for cues loaded in fader
pairs . The window displays the cue number, a running clock of the fade,
and the percentage of the fade time that has run .
Cue sheet
The cue sheet lists up to nine stored cues. Each cue listing includes
fade, wait and delay times, and cue name and link information.
Operator prompt line
The operator prompt line displays messages to guide you through
Expression operations . For example, when you press [Chan], this line
displays the message, Select channel numbers . If you are having
problems, look here for information or help.
Page display
The page display indicates which submaster page is currently loaded . If
any submasters from the previously loaded page are still active, the
message Page 2 loading is displayed . The message changes to Page 2
loaded when all submasters are loaded from the new page.
Submaster window
The submaster window displays the current level settings for submas-
ters . On a color monitor, pile-on submasters are displayed in green, and
inhibitive submasters are displayed in red .
4 - 5
Need help?
Do you have a question about the Expression 2.0 and is the answer not in the manual?