Creating An Effect - ETC Expression 2.0 User Manual

5 - 30

Creating an effect

To create an effect follow these steps:
1. Press [Blind] . You must be in Blind to create an effect.
2. Press [Type] to display the fade type menu .
3. Select 3, Effect . Expression displays the following screen.
4. Press [Chan], and enter channel number(s) you want to include in
the first step . Then press [Enter].
Or, press [Group], enter a group number, and press [Enter] to enter
all channels in that group . You can also select channels in cues and
submasters by pressing [Group], then [Cue] or [Submaster], entering
the cue or submaster number, and pressing [Enter].
5. Enter a two-digit high level . To set level at 100 percent, press [Full] .
Or, press [Enter] to accept the displayed setting.
6. Enter a two-digit low level setting . Or, press [Enter] to accept the
displayed setting.
Expression 2.0