Playing Cues Back - ETC Expression 2.0 User Manual

Chapter 4 Learning the basics

Playing cues back

To playback the cues you created in Lesson 2, follow these steps:
1. Press [Stage] to display Stage mode.
2. Press [Cue] to indicate that you want to select a cue.
3. Enter the cue number you want to playback . To playback cues you
recorded from Lesson 2, press [1][.][1].
4. Press either [Go] key . Cue 1.1 begins . Expression assumes that you
want to play cue 2 next.
5. Press [Go] to start cue 2.
If you press [Go] before a cue finishes playing, the previous cue stops,
and the new cue begins from the levels at which the previous cue was
interrupted.
4 - 27